• SKYRC eN18 1.2A 240V NiMH Battery Charger w/ Deans Plug - SK-100184-01
1 1

SkyRC

SKYRC eN18 1.2A 240V NiMH Battery Charger w/ Deans Plug - SK-100184-01

SKYRC eN18 1.2A 240V NiMH Battery Charger w/ Deans Plug - SK-100184-01

$39.95
$39.95
Sale Sold out
Taxes included. Shipping calculated at checkout.
Contact us for more information

SKYRC eN18 1.2A 240V NiMH Battery Charger w/ Deans Plug - SK-100184-01

Compact but Versatile
Want to get the most out of your batteries? You really need to make sure you can deliver a full charge to your batteries with a SkyRC eN18 Peak Charger.
SkyRC eN18 is more than just a peak charger - it's a versatile peak charger capable of charging both electric car battery packs and nitro car receiver packs. This is possible because the SkyRC eN18 offers voltage ranging from 4.8 to 14.4V at 1.2 amp. You can charge 6-8 cell NiMH battery packs as found in most electric cars, trucks, and buggies. With the 1.2 amp charge rate, you can safely fast charge any 4-5 cell nitro car NiMH receiver's pack.
             
KEY:
Solid Red - Ready for battery
Flashing Green - Charging
Solid Green - Fully Charged
Flashing Red - Error

Delta-V Peak detection
With the Delta Peak detection circuitry, the SkyRC eN18 allows your batteries to reach their full capacity when charging, so you can get the most power and run time from your batteries. It achieves this by using peak detection circuitry that monitors the voltage of the battery pack while it's being charged and automatically shuts the charger off when the packs' voltage peaks and then starts to drop. This is in contrast to a timed charger, where you often end up with a battery pack that's not fully charged.
                                    
  • Delta Peak detection circuitry
  • Compact and lightweight
  • NiMH compatible
  • Reliable electronics
  • Lower operating temperature
  • Maximum output 1.2A
  • Short-Circuit Protection
  • Reverse Connection Protection
  • 110-240V Universal-Voltage Input

SPECS:

Input: AC100V-240V 50/60Hz

Battery Type: NiMH

Output Voltage: 4.8V-14.4V

Output Current: 1.2A

Output Power: 18W Max.

Battery Cell: 4-8S

Output Cable Length: 70cm

Operating Temperature: 0℃-40℃

Relative Humidity: 5%-75%

Storage Temperature: -10℃ - 70℃

Storage Humidity: 5%-75%

Weight: 120g

PLEASE NOTE: BATTERY CHARGERS SHOULD ALWAYS BE POWERED BEFORE YOU PLUG YOUR BATTERY IN.

View full details