1
/
of
1
E-Flite
E-FLITE 30A Pro SB Brushless Coated ESC V2 - EFLA1030BC
E-FLITE 30A Pro SB Brushless Coated ESC V2 - EFLA1030BC
Regular price
$129.95
Regular price
Sale price
$129.95
Unit price
/
per
Taxes included.
Shipping calculated at checkout.
Couldn't load pickup availability
E-FLITE 30A Pro SB Brushless Coated ESC V2 - EFLA1030BC
This 30 Amp ESC is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers,saving you weight and complication.
Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A* continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axisstabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC on Any recommended input voltage
- 3-to 6-cell Li-Po, 9-to 18-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cut off with settings for 3-cell Li-Po (9.2V), 6-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range: : 1.1–1.9ms or 1.2–1.8ms
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges to for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mmgold bullet connectors on motor output leads
- * Proper cooling and airflow required
