SKYRC Power Switch w/ LVD - SK-600054

A SKYRC innovation, the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model. It's a simple push button designed to eliminate the problems associated with intermittent contact in an ordinary mechanical switch.

The sealed unit is plastic and is easy to mount in your car anywhere by use of double sided tape or the screw mount base plate. Two different base plates are included so you can change the base plate to match your mount position.

The switch also features a LiPo mode button, by turning this on the switch unit will auto detect low LiPo battery voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turn off if you have other safeguards in place or using NiMH/NiCad battery. Beside that the power switch informs you about the remaining capacity and conditions of your battery pack. 

SWITCH ON/OFF SETUP

NiMH/NiCad Battery Pack
For switching on please press and hold the button for one second. The PWR LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

LiPo Battery Pack
For switching on please press and hold the button for more than three second. The PWR LED and LIPO LED will turn on. For switching off please press and hold the button until all LEDs turn off. The PWR LED also shows you the remaining battery capacity when switched on.

SPECS:

• Input Voltage: 4-12V
• Max. Current: 10 Amp
• Battery Mode: 1. NiHM / NiCad 2. LiPo
• Low Voltage Protection: 6.2V(LiPo)
• Operating temperature: 0-50℃
• Weight: ≤7g

 INSTRUCTION MANUAL